Easy installation of farm fence

Before installing the farm fence (prairie net), first conduct site observation to see if the 8-meter-wide area of the farm fence boundary line can be leveled. If there is any obstacle, first remove it.

Install corner posts at the corners and corners of the azimuth of the farm installation, and install a farm center post every 400 meters along the installation road from the corner posts. Install a farm fence every 14 meters, which must be straight, strong and on the line. The depth of the corner post and the main post of the door post is 0.7 meters, the small post of the farm is 0.5 meters, and a support rod is installed.

Two door posts, two corner posts, and one central post). Drive in the ground anchors (two ground anchors for the door post, corner post and center post).

Open the farm fence in one direction from the corner post of the farm fence. The side with the small weft line is on the ground. Knot the joints of the two rolls of grassland mesh fence and the farm fence. Then use a tensioner to clamp each weft at the other end with a chuck, and fix it on the center post of the farm, and tension it every 200 meters. When tightening, each weft must be evenly tightened. It is enough to investigate the ripples on the plane of the grassland net fence and cattle fence net fence in a place far away from the end. During the tensioning process, the grassland net fence and cattle fence should be swayed vigorously to avoid being entangled by other things, so as to make the force uniform, and then cut the other end and tie it to the center post. Do not use tie hooks to tie the grassland net fence and cattle fence to the small posts by "separating one weft wire and tying one weft wire". The two adjacent small posts should be tied with staggered knots. For the farm fence fence, at least two hooks are used between every two small posts, and so on.